The BISSELL QuickSteamer™ Lightweight Deep Cleaner, 1950 Series, is a high-tech deep cleaning system designed for household use, specifically for cleaning carpets and bare floors. Its primary function is to deep clean by spraying a cleaning solution and then extracting soiled water, effectively removing dirt, stains, and allergens.
Function Description:
The QuickSteamer operates by combining hot tap water with BISSELL cleaning formulas to create a powerful cleaning solution. This solution is sprayed onto the carpet or bare floor through a spray bar located in the floor nozzle. A detent lever allows the user to recline the handle for cleaning. The machine then uses suction to lift the soiled water and dirt from the surface into a separate dirty water tank. This process helps to remove embedded dirt, spots, spills, and high-traffic area grime, contributing to prolonged carpet life and reduced household dust and allergens. The device is designed for use on surfaces moistened by the cleaning process, and it is crucial to use only BISSELL-formulated cleaning products to avoid damage and voiding the warranty.
Important Technical Specifications:
- Power: The appliance operates on a nominal 120-volt circuit and requires a properly grounded outlet with a 3-prong grounded plug.
- Water Tank Capacity:
- Clean Water Tank: Holds 1/2-gallon of hot (not boiling) tap water and cleaning solution.
- Dirty Water Tank: Holds approximately 1/2-gallon of soiled liquid. Overfilling the dirty water tank can damage the unit.
- Cleaning Formulas: Exclusively designed for use with BISSELL Fiber Cleansing Formula™ for carpets and BISSELL Floor Cleansing Formula™ for bare floors. The use of formulas containing lemon or pine oil, chemical spot cleaners, or solvent-based soil removers is strictly prohibited as they can react with the plastic materials, causing cracking or pitting.
- Weight: Described as a "Lightweight Deep Cleaner," indicating ease of maneuverability.
- Components: The device consists of a Handle Assembly, Lower Body, Clean Water Tank, Dirty Water Tank, Floor Nozzle with Spray Bar, Power Switch, and Quick Release Cord Wrap™. Some models may include a Bare Floor Tool and a Cross Action™ Brush.
Usage Features:
- Assembly: The QuickSteamer is easy to assemble, requiring only two steps and a Phillips head screwdriver to attach the handle to the lower body.
- Operation:
- Preparation: Users are advised to plan cleaning activities to allow carpets time to dry (typically 3-4 hours), vacuum thoroughly, and move furniture. Cleaning should be done in 3' x 4' sections, starting from areas farthest from the exit.
- Filling Tanks: The Clean Water Tank is filled with two capfuls of BISSELL cleaning formula and 1/2-gallon of hot tap water.
- Cleaning Process: Turn the power switch ON. Press the detent pedal to recline the handle. Depress the spray trigger to apply cleaning solution while moving the cleaner back and forth. Release the trigger and repeat the back-and-forth motion to extract soiled water. Continue until no more dirt can be removed.
- Bare Floor Cleaning (select models): An optional Bare Floor Tool can be attached. For bare floors, only BISSELL Floor Cleansing Formula™ should be used. Pre-sweeping or vacuuming is recommended, and old wax should be removed. The cleaning process involves slowly moving the QuickSteamer back and forth over the soiled surface while depressing the trigger, then repeating without the trigger to extract.
- Portability: Features large, easy-rolling wheels for mobility.
- Cord Management: Includes a Quick Release Cord Wrap™ for convenient storage of the power cord.
- Safety: Emphasizes the importance of proper grounding, avoiding use with damaged cords or plugs, and not exposing the unit to rain or storing it outdoors. Users are cautioned against picking up hot/burning objects, flammable/combustible materials, or toxic materials. Extra care is advised when cleaning stairs and working around children.
Maintenance Features:
- Tank Emptying and Rinsing: The Dirty Water Tank should be emptied when the dirty water reaches the full line or when the Clean Water Tank is empty. It is removed by pressing the detent pedal, releasing latches, lifting it from the lower body, and then pouring out contents. The tank should be rinsed thoroughly with clean water through the vent cover.
- Clean Water Tank Storage: If cleaning solution remains in the Clean Water Tank, it can be stored this way for the next cleaning task, but soiled solution should never be kept in the Dirty Water Tank.
- Cleaning Spray Bar: If the floor nozzle stops spraying, the spray bar may be clogged and needs cleaning.
- General Cleaning: All surfaces should be wiped with a soft cloth after use.
- Storage: The cleaner should be stored upright in a protected, dry area. It is crucial not to store the unit where freezing may occur, as this can damage internal components.
- Foam Filter: The vent cover contains a foam filter, implying it may require periodic cleaning or replacement, though specific instructions are not detailed in the provided excerpts.
- Brush Maintenance: For models with a Cross Action™ Brush, the brush can be removed by depressing tabs for cleaning or replacement.
The BISSELL QuickSteamer is backed by a one-year limited warranty, covering defective or malfunctioning parts under personal, non-commercial use. Routine maintenance components like filters, belts, or brushes, and damage from negligence or misuse, are not covered. Consumer services are available via phone and website for support, repairs, and replacement parts.
Need help?
General
To Next Page