How to fix a Bissell SPINWAVE 2859 Vacuum Cleaner when the brush roll is stuck?
If the brush roll of your Bissell Vacuum Cleaner is stuck, turn the robot OFF and remove any hair and debris from the brush roll.
How to fix Bissell SPINWAVE 2859 Vacuum Cleaner when edge cleaning brushes are stuck?
If the edge cleaning brushes of your Bissell Vacuum Cleaner are stuck, turn OFF the robot and remove any hair and debris from the edge cleaning brushes.
What to do if the Bissell Vacuum Cleaner shows low water?
If your Bissell Vacuum Cleaner indicates low water, remove the mop tank and refill it within 3 minutes to resume cleaning.
What to do if the left or right wheel is stuck on my Bissell SPINWAVE 2859 Vacuum Cleaner?
If the left or right wheel is stuck on your Bissell Vacuum Cleaner, turn the robot OFF and remove any hair and debris from the wheels.
How to resolve a Bissell Vacuum Cleaner being trapped, lifted, or having dirty cliff sensors?
If your Bissell Vacuum Cleaner is trapped, lifted, or has dirty cliff sensors, place the robot on the floor away from objects and resume cleaning. If the error persists, turn the robot OFF and use a dry cloth to clean the three cliff sensors on the bottom of the robot.
What to do if the front caster wheel sensor is blocked on a Bissell Vacuum Cleaner?
If the front caster wheel sensor is blocked on your Bissell Vacuum Cleaner, turn the robot OFF and remove the front caster wheel assembly. Clear any debris from the assembly housing, and then reinstall the wheel.
What to do if the bumper is stuck or the Bissell Vacuum Cleaner robot is trapped?
If the bumper is stuck or your Bissell Vacuum Cleaner robot is trapped, turn OFF the robot and tap the bumper several times to release any debris that may have accumulated.
What to do if Bissell SPINWAVE 2859 shows low water?
If your Bissell Vacuum Cleaner indicates low water, turn it OFF, remove the water tank, fill it, and then resume cleaning.
How to fix Bissell Vacuum Cleaner brush roll if it's stuck?
If the brush roll on your Bissell Vacuum Cleaner is stuck, turn the robot OFF and remove any hair or debris from the brush roll.
What to do if Bissell SPINWAVE 2859 Vacuum Cleaner edge cleaning brushes are stuck?
If the edge cleaning brushes on your Bissell Vacuum Cleaner are stuck, turn the robot OFF and remove any hair or debris from the edge cleaning brushes.
General| Style | robotic mop |
|---|---|
| Color | pearl white, white |
| Floor Type | bare floor, carpet, ceramic tile, hardwoods, rugs |
| Dust Bin Capacity | 0.11 gallons |
| Filter | 2-stage |
| Bagless | yes |
| Wet And Dry Cleaning | yes |
| ?leaning Area | 6 inches |
| Remote Control | yes |
| Smart Applications | yes |
| Voltage | 14.4 volts |
Weight and Dimensions| Length | 14 inches |
|---|---|
| Height | 4 inches |
| Width | 13 inches |
| Net Weight | 7.5 pounds |
To Next Page
