Bissell STAIN ERASER PET User Manual

global.BISSELL.com 5
WARNING Keep spray away from face. Failure to do so may result in personal injury.
Suction
Channel
4. Scrub the area with the
brush, keeping the nozzle flat
on the ground, as shown.
Tip: Turn machine off while
scrubbing to allow formula to
treat the stain.
5. For maximum suction, firmly
press the suction channel down
on the cleaning surface.
Note: Area may be damp to
touch after cleaning.
6. Empty dirty water tank
when it reaches the “MAX
FULL” line.
1. Empty dirty water tank when
it reaches the “MAX FULL” line.
2. Turn machine OFF. Squeeze
tank release latches and pull to
remove tank.
3. Pull the dirty water tank
plug open and empty.
Note: Plug remains attached to
tank during emptying.
4. Press firmly on center of
plug to close the tank.
5. Press the dirty tank back
into the machine until it clicks
into place.
Removing & Emptying the Dirty Water Tank
For additional tips for maintaining your machine visit global.BISSELL.com.
Spot Cleaning Carpet & Upholstery (continued)

Bissell STAIN ERASER PET Specifications

General

Cordless	Yes
Battery Type	Lithium-Ion
Tank Capacity	8 oz
Power Source	Battery
Type	Handheld
Included Components	Trial Formula