Need help?Do you have a question about the Bistos BT-300 and is the answer not in the manual?
Guidelines for safe operation, inspection intervals, and approved accessories for the BT-300 monitor.
Critical warnings regarding explosion and shock hazards, proper power connections, and use of approved components.
Details the initial system startup procedures for the BT-300 monitor.
Lists and describes user-configurable settings for alarms, paper speed, and other operational parameters.
Explains how the monitor alerts caregivers to abnormal heart rates and how to set alarm limits.
Procedure to set paper speed, fetal movement print, auto print, Dop2 offset, and record enlarge functions.
Instructions for configuring the monitor's internal time and date settings.
Description of the main display screen, including FHR, UC, and indicator symbols.
Details the FHR display frames, heart rate indication, and speaker volume adjustment.
Describes the UC frame, showing numeric values and baseline for uterine contractions.
Explains error messages and status indicators shown on the monitor during operation.
Overview of the front panel buttons and their functions, including volume, alarm, and record controls.
Step-by-step procedure for monitoring fetal heart rate using the ultrasound transducer.
Step-by-step procedure for measuring uterine contractions using the UC probe and setting baseline.
Procedures for users to perform basic performance checks upon turning on the unit.
Guidance on what to do if the monitor or accessories are damaged or malfunction.
To Next Page
General
