Need help?Do you have a question about the BitaTek PS800Z and is the answer not in the manual?
General| Connectivity | Bluetooth, USB |
|---|---|
| Wireless Range | Up to 100 meters |
| Resolution | 4 mil |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Interface | USB, RS232 |
| Power Supply | Rechargeable Li-ion battery |
| Humidity | 5% to 95% (non-condensing) |
| Drop Specification | 1.5m drop to concrete |
Resets the scanner to factory default settings for easy configuration recovery.
Scans a barcode to display the current firmware version of the device.
Configures the communication interface, supporting RS-232, USB HID, and USB Virtual COM.
Sets the terminal type for keyboard wedge emulation, including IBM AT compatibility.
Selects the local keyboard language for accurate character input.
Enables or disables the emulation of function keys for enhanced usability.
Activates ALT Mode to emulate various keyboard languages, useful when direct selection fails.
Configures the Caps Lock key behavior, allowing it to be enabled or disabled.
Controls the behavior of the numeric keypad, enabling or disabling its functionality.
Sets the delay between transmitted characters for precise data timing.
Configures a delay after transmitting data in keyboard wedge mode.
Adjusts the transmission speed of keyboard data for optimal performance.
Defines the termination character for keyboard wedge output to match application requirements.
Sets the data transmission speed (bps) for RS-232 communication.
Configures the number of data bits per character for serial communication.
Sets the number of stop bits per character in serial data transmission.
Configures the parity checking method (None, Odd, Even, Mark, Space) for error detection.
Sets the delay between transmitted characters for RS-232 communication.
Configures a delay after transmitting data for RS-232 communication.
Sets the time the scanner waits for a host response.
Selects the flow control method (None, RTS/CTS, ACK/NAK, Xon/Xoff) for serial communication.
Defines the termination character for RS-232 output.
Configures how the scanner operates, including Trigger, Auto Off, Continuous, and Test modes.
Manages buzzer settings including frequency, duration, power-up, and good read alerts.
Configures prefix, suffix, and character insertion for barcode data manipulation.
Enables or disables the transmission of barcode type information along with data.
Adjusts scanning for inverted barcodes (white bars on black background).
Settings for UPC-A barcodes: enable/disable, code ID, conversion to EAN-13.
Settings for UPC-E barcodes: enable/disable, code ID, conversion to UPC-A.
Settings for EAN-13 barcodes: enable/disable, code ID, check digit, ISBN/ISSN conversion.
Settings for EAN-8 barcodes: enable/disable, code ID, check digit, truncation, supplements.
Configuration options for Code39 symbology, including check digit and ASCII conversion.
Settings for Codabar barcodes: enable/disable, code ID, check digit, data combine, start/end transmit.
Options for Code93 barcodes: enable/disable, code ID, check digit, length limits, truncation.
Settings for Code 128 symbology: enable/disable, code ID, check digit, FNC1/FNC2.
Configuration for Interleaved 2 of 5 barcodes: enable/disable, code ID, check digit, length limits.
Settings for Industrial 2 of 5 barcodes: enable/disable, code ID, check digit, length limits.
Options for Matrix 2 of 5 barcodes: enable/disable, code ID, check digit, length limits.
Configuration for MSI/Plessey barcodes: enable/disable, code ID, check digit, length limits.
Settings for CODE 32 barcodes: enable/disable, code ID, check digit, truncation.
Options for CODE 11 barcodes: enable/disable, code ID, check digit, length limits.
Settings for GS1 Databar symbologies: enable/disable, limited, expanded, conversion.
Configuration for Telepen barcodes: enable/disable, code ID, check digit, length limits.
Settings for China Post Code: enable/disable, code ID, check digit, length limits, redundancy.
Provides a comprehensive table mapping character codes to their ASCII representations.
To Next Page