To Next PageTo Next Page
Need help?Do you have a question about the BitFenix Nova Mesh SE Series and is the answer not in the manual?
General| Type | Mid Tower |
|---|---|
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Material | Steel, Plastic |
| Expansion Slots | 7 |
| Max CPU Cooler Height | 160 mm |
| Max PSU Length | 160mm |
| Drive Bays | 2 x 3.5" |
| Front I/O Ports | 2 x USB 3.0 |
| Cooling Support | Front: 2 x 140mm, Rear: 1 x 120mm, Top: 2 x 120mm |
| Pre-installed Fans | 1 x 120mm |
| Radiator Support | Front: 240mm, Top: 240mm, Rear: 120mm |
Instructions on how to detach the right side panel or tempered glass side panel and front panel.
Guide to removing the top and PSU dust filters from the computer case.
Details on drive bay locations and installation procedures for 2.5" and 3.5" drives.
Step-by-step guide for installing the power supply unit (PSU) into the case.
Procedure for installing a VGA card into the motherboard's expansion slot.
Instructions for installing 120mm fans at the rear and front of the case.
Guide for installing 140mm fans at the front of the case.
Procedure for installing 120mm fans on the top panel of the case.
Identification and function of front panel buttons, ports, and LEDs.
Instructions for connecting ARGB components to the 6+6 controller.
