Answer a telephone call
Briefly press the centre button to answer an incoming call.
Reject an incoming call
Press and hold the centre button for 2 seconds to reject an incoming call.
End a call
Briefly press the centre button to end a call.
Adjust the volume
Briefly press the (+) button to increase volume or press the (-) button to reduce the volume.
A beep can be heard when the volume reaches maximum or minimum volume.
Volume adjustment
During the call, long press the volume + key to increase volume. When the volume reaches
maximum, there is beep sound to prompt.
Long Press volume- key to reduce volume.
Play, Pause and Skip Audio
Briefly press the centre button to either play or pause the audio.
To skip backward, press and hold the "-" button for 2 seconds, or the “+” to skip forward.
Redial the last number called
Double-click the centre button to redial the most recent outgoing telephone call from your
connected Bluetooth device.
Light notifications
Standby mode - A blue light flashes once every 5 seconds.
Active audio connection - A blue light flashes once every 2 seconds.
Pairing
Red and blue light flashes consecutively.
Charging the battery
A continuous red light is visible whilst charging until the earphones are fully charged. When the
charging is complete, a blue light replaces the red light. You can then disconnect the charging
cable from the earphones. For optimal battery health, it is advisable that the earphones should
not be kept plugged into a charger for a long period after they have been
fully charged. Charging usually takes 1 to 2 hours.
Power Status
There will be a red light flashing and a voice prompt heard through the earphones when the
BM-IEBTEC AURAL BUDS | 2
To Next Page
Loading...