25
Inserting and Pulling out the
Micro SD card
Inserting:
Put the Micro SD card face up (side with
words), and slightly force the card into the
socket of the card, i.e. connecting the unit.
Under this state, you can play the content in
the Micro SD card.
Pulling:
Slightly push the Micro SD, and it will
bounce by a section, and then you can take
it out.
Caution:
Please perform inserting and pulling
operation when power is off! Otherwise,
it will lead to the loss or damage to the
files within the unit! If no card is inserted, the
computer will be unable to perform read and
write operation for the disk notes of the later
removable disk (Micro SD card).
Battery:
High capacity Polymer battery is used for
this tablet.
The duration available of the battery power
depends on volume, types of playing files
and operation of batteries. The tablet can
be set up by the user as “user define power
off time” or “display setup” to save batteries.
Charging:
This unit can be recharged by USB port.
To Next Page
Loading...