24
Basic Operation
Power on
In the shutdown state, long press ” ”
button boots.
Power off
In the power on state, long press the “ “
key 3 seconds then pop-up device options,
select “ Power off “ for shut down.
Sleep
The machine under normal operating
conditions, press the power button into
hibernation, then screen will off. Press the
power button again to resume normal mode.
Power reset
If there is shutdown to the tablet in the
process of operation, you can turn off and
restart the tablet by pressing “reset” key.
Screen time out
If you do not contact the tablet within the
set time, and do no operate by the button,
the contact screen will be automatically
turns off.
In any state, short press “ “ button and
for activation; Then skid the lock upwards to
the green of spotted which will accomplish to
access to the upper interface.
If it is necessary to deactivate the contact
screen time out function, you can set the
[Screen time out] option under [display]
function into “Never “.
Using the Micro SD card
After tablet is connected with the computer,
you will find two moving disks. The first one
is the built-in memory disk for this unit and
the other is the disk for the Micro SD card. If
no card is inserted, the second disk can not
be opened. This unit supports the extension
of the Micro SD card from 16GB to 32GB.
To Next Page
Loading...