Bits Limited SMART STRIP SCG-3MVR User Manual

© 2016 BITS Smart Strip, LLC
Smart Strip
®
is a registered trademark of BITS Smart Strip, LLC
700 N Valley St., Suite B-#41123
Anaheim, CA 92801
631.261.8764
www.bitsltd.net
User Guide
Model - SCG-3MVR
COMPATIBILITY
The 5
th
Generation Smart Strip
®
works with the following devices in the
CONTROL OUTLET:
•
Most computers & home entertainment equipment.
•
Light-duty workshop equipment.
•
15 Watt or greater incandescent lamps.
•
5 Watt or greater fluorescent lamps.
IMPORTANT NOTES:
•
The adjustment dial is a ½ turn dial; do not force it.
•
Some computers can take 2-3 minutes before they sleep or hibernate and this
may affect how you calibrate your Smart Strip
®
.
•
When the computer does go into sleep/hibernate, everything plugged into the
SWITCHED OUTLETS should also turn off.
•
Notebook computers can go into sleep mode while the battery is still charging.
Devices plugged into the switched outlets may NOT turn off until the charging
cycle is complete.
•
Risk of electric shock. Do not plug into another relocatable power tap.
If you have any questions please visit our web site first since we have an extensive
knowledge base which will most likely answer your question.

Bits Limited SMART STRIP SCG-3MVR Specifications

General

Brand	Bits Limited
Model	SMART STRIP SCG-3MVR
Category	Surge Protector
Language	English

Summary

Smart Strip Compatibility And Operation Notes

Understanding The Smart Strip

Installing The Smart Strip

Power Switch

The lighted switch functions as a 15 amp circuit breaker, normally left on.

Ground & Surge Indicator

Indicates if equipment is protected; check ground or surge protection if unlit.

Control Outlet Functionality

Controls switched outlets; they are on when the control device is on, off when asleep.

Constant Hot Outlets

Outlets for devices like cable boxes that only turn off with the main power switch.

Automatically Switched Outlets

Accessories here turn on/off with the control outlet device, saving energy.

Setting The Sensitivity Adjustment