Why is the Bittel HWD9888(48)TSD-NS Telephone handset indicator light flashing?
If the Bittel Telephone handset indicator light is flashing, it usually means the handset battery is low. Place the handset on the base to recharge it.
What to do if the incoming calls volume is unnormal on Bittel HWD9888(48)TSD-NS?
If the incoming call volume on your Bittel Telephone is not normal, check the VOL adjustment to ensure it is set appropriately.
Why Bittel Telephone handsets can not off-hook over 2 minutes?
If your Bittel Telephone handsets cannot stay off-hook for more than 2 minutes, it could be due to several reasons: 1. The handset may not be registered and needs to be registered again. 2. The handset may be out of range of the base. Move it closer to the base. 3. The battery may be low and needs to be recharged. Press the ON key of the handset to check the indicator voice.
To Next Page
General
