4 Bittium Tough Mobile Quick Start Guide
The ambient light sensor and proximity sensor
are located next to the camera on the front of
Tough Mobile. The micro USB 3.0 port is located
on the bottom of Tough Mobile.
Please read this quick guide carefully
before using the device. Bittium Tough
Mobile is water and dust resistant (IP67).
In order to maintain the water and dust resistance
the battery cover, the USB connector cover and the
headset cover must be properly closed and un-
damaged.
Intentional dropping and underwater immersion of
Bittium
Tough Mobile should be avoided. Bittium
Tough Mobile is not designed for underwater use
or use for example in shower. Purposeful use of
the device in these environments will result in
a void of the warranty. For more info on Bittium
Tough Mobile Ingress Protection see
www.bittium.com/BittiumToughMobile.
Box contents
Bittium Tough Mobile sales package contains
the following items:
• Battery
• Charger, with US, UK and EU adapters
• Micro USB cable
• 3.5 mm Headset
• Quick Start Guide
• Plastic wedge for opening battery cover
Box contents and the appearance of the
accessories may vary.
To Next Page
Loading...
Need help?
General
