EasyManua.ls Logo

Bitzer 4NC-20.2 Series

Bitzer 4NC-20.2 Series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Betriebsanleitung
Operating Instructions
Instruction de service
Halbhermetische
Hubkolbenverdichter
2HL-1.2(Y) .. 2N-7.2(Y)
4VC-6.2 .. 4NC-20.2(Y)
4Z-5.2(Y) .. 8FC-70.2(Y)
44J-26.2(Y) .. 66F-100.2(Y)
Inhalt Seite
1 Sicherheit 1
2 Anwendungsbereiche 3
3 Montage 4
4 Elektrischer Anschluss 12
5 In Betrieb nehmen 16
6 Betrieb / Wartung 22
7 Außer Betrieb nehmen 23
1 Sicherheit
Diese Kältemittel-Verdichter sind zum
Einbau in Maschinen entsprechend
der EU-Maschinenrichtlinie
98/37/EG vorgesehen. Sie dürfen nur
in Betrieb genommen werden, wenn
sie gemäß vorliegender Anleitung in
diese Maschinen eingebaut worden
sind und als Ganzes mit den entspre-
chenden gesetzlichen Vorschriften
übereinstimmen (anzuwendende
Normen: siehe Herstellererklärung).*
Autorisiertes Fachpersonal
Sämtliche Arbeiten an Verdichtern
und Kälteanlagen dürfen nur von
Fachpersonal ausgeführt werden,
das in allen Arbeiten ausgebildet
und unterwiesen wurde. Für die
Qualifikation und Sachkunde des
Fachpersonals gelten die jeweils gülti-
gen Richtlinien.
Semi-hermetic Recipro-
cating Compressors
2HL-1.2(Y) .. 2N-7.2(Y)
4VC-6.2 .. 4NC-20.2(Y)
4Z-5.2(Y) .. 8FC-70.2(Y)
44J-26.2(Y) .. 66F-100.2(Y)
Content Page
1 Safety 1
2 Application ranges 3
3 Mounting 4
4 Electrical connection 12
5 Commissioning 16
6 Operation / Maintenance 22
7 De-commissioning 23
1 Safety
These refrigeration compressors are
intended for installation in machines
according to the EC Machines
Directive 98/37/EC. They may be put
to service only, if they have been in-
stalled in these machines according
to the existing instruction and as a
whole agree with the corresponding
provisions of legislation (standards to
apply: refer to Manufacturers Declara-
tion).*
Authorized staff
All work on compressor and refrigera-
tion systems shall be carried out only
by refrigeration personnel which has
been trained and instructed in all
work. The qualification and expert
knowledge of the refrigeration person-
nel corresponds to the respectively
valid guidelines.
Compresseurs hermétiques
accessibles à pistons
2HL-1.2(Y) .. 2N-7.2(Y)
4VC-6.2 .. 4NC-20.2(Y)
4Z-5.2(Y) .. 8FC-70.2(Y)
44J-26.2(Y) .. 66F-100.2(Y)
Sommaire Page
1 Sécurité 1
2 Champs d’application 3
3 Montage 4
4 Raccordement électrique 12
5 Mise en service 16
6 Service / Maintenance 22
5 Mise hors service 23
1 Sécurité
Ces compresseurs frigorifiques sont pré-
vus pour être incorporés dans des machi-
nes conformément à la Directive CE
Machines 98/37/CE. Leur mise en servi-
ce est uniquement autorisée s’ils ont été
incorporés dans des machines conformé-
ment à la présente instruction et si ces
machines répondent dans leur totalité
aux réglementations légales en vigueur
(les normes qu’il faut utiliser: voir la
Déclaration du Constructeur).*
Personnel spécialisé autorisé
Seul un personnel spécialisé ayant été
formé et initié est autorisé à réaliser
l'ensemble des travaux sur les compres-
seurs et installations frigorifiques. Les
directives en vigueur à cet effet sont vala-
bles pour la qualification et la compéten-
ce du personnel spécialisé.
* Hinweis gilt für Länder der EU * Information is valid for countries of the EC * Indication valable pour les pays de la CE
KB-110-6

Other manuals for Bitzer 4NC-20.2 Series

Question and Answer IconNeed help?

Do you have a question about the Bitzer 4NC-20.2 Series and is the answer not in the manual?

Bitzer 4NC-20.2 Series Specifications

General IconGeneral
Number of Cylinders4
Weight138 kg
Degree of protectionIP54
RefrigerantR134a, R404A
Oil charge1.5 L
Voltage380-420V Y-3-50Hz
Model4NC-20.2

Summary

Safety

Residual Hazards

Understand and mitigate unavoidable hazards associated with compressor operation.

Mounting and Installation

Compressor Installation Procedures

Step-by-step guide for correct compressor installation.

Compressor Connections

Electrical Installation Guidance

Motor Systems and Protection

Part-Winding Motor Start

Details on part-winding start motors, wiring, and contactors.

Motor Protection Devices

Overview of motor protection devices like SE-B1, SE-B2, INT389.

Commissioning and Start-up

Commissioning Procedures

Steps for safely putting the compressor into service.

Strength Pressure Testing

Guidelines for testing the pressure strength of the refrigerant circuit.

Tightness Testing

Procedures for checking the circuit's tightness.

Refrigerant Charging

Instructions for safely charging the system with refrigerant.

Pre-Start Checks

Essential checks to perform before starting the compressor.

Start-up Procedure Details

Steps for starting the compressor and initial checks.

Safe Operation Recommendations

Operation and Maintenance

Regular Maintenance Checks

Routine inspections of the plant and compressor components.

De-commissioning and Disposal

Related product manuals