EasyManua.ls Logo

Bitzer ECOSTAR LHV6/4FC-5.F1Y - Page 20

Bitzer ECOSTAR LHV6/4FC-5.F1Y
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 KT-200-2
The fans start when the condensing
temperature is 5 K above the current
ambient temperature or minimum 15°C.
With high ambient temperatures, they
are always operated at max. speed
from t
c
= 50°C.
This characteristic causes a
considerably reduced power
consumption of the condenser fans, in
particular with lower compressor
speeds.
To achieve additional savings in
systems with electronic injection valves,
the lower switch-on level of the
condenser fan (menu 4.2.5.8 M
IN.SET or
MIN.SOLL) may be reduced. On the
other hand, it might be necessary to
increase the lower switch-on level in
case of unfavourable configuration to
guarantee a certain minimum pressure
upstream of the injection valve.
When the upper switching threshold
(menu 4.2.5.10 M
AX.SET or MAX.SOLL) is
exceeded, the condenser fans are
operated at maximum speed,
independently of the ambient
temperature.
凝縮温度が現在の外気温を5 K上回るか、
最低15°Cになるとファンが起動します。
外気温が高い場合、t
c
= 50°C以上になる
とファンは常に最高速度で作動します。
この特性のため、特にコンプレッサーが
低速のときにはコンデンサーファンの消
費電力が大幅に低減します。
電子噴射弁付きシステムでは、さらに節
約できるよう、コンデンサーファンの下
限スイッチングレベル(メニュー4.2.5.8
M
IN.SETまたはMIN.SOLLを下げることが
できます。一方で、不利となる設計の場
合には、噴射弁の上流側の最低圧力を保
証するために下限スイッチングレベルを
上げる必要があります。
上限スイッチングレベル(メニュー4.2.5.10
M
AX.SETまたはMAX.SOLLを超えた場合
には、コンデンサーファンは外気温に関
係なく最高速度で作動します。
n Fan speed in %
t
c
Condensing temperature
t
amb
Ambient temperature
to Speed characteristics (low sound
mode)
Example: 13°C ambient temperature
Example: 27°C ambient temperature
Example: 38°C ambient temperature
n ァン速度(%
t
c
凝縮温度
t
amb
外気温
①~③ 速度特性曲線(静音モード)
例:外気温13°C
例:外気温27°C
例:外気温 38°C
Fig. 10 Characteristic of the fan speed in
low sound mode
10 静音モード時のファン速度の特性
EIN / ON EIN / ON
E
IN / ON

Other manuals for Bitzer ECOSTAR LHV6/4FC-5.F1Y

Related product manuals