Ver. 1.01
4-1-1 Send Command
• The Windows driver serves to receive the content for customer display from an
application and send it to the customer display. The “Send Commands” function
allows for the addition of desired commands at the start or end of the content.
1) Start Document: Addition of command at the beginning of the document.
2) Start Page: Addition of command at the beginning of the page.
3) End Page: Addition of command at the end of the page.
4) End Document: Addition of command at the end of the document.
* For more information about the hexadecimals that can be entered in “Start
Document”,
“Start Page”, “End Page” and “End Document”, refer to the Commands Manual.
To Next Page
Loading...
Need help?
General
