Need help?Do you have a question about the BIXOLON SLP-DX220 Series and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Max Print Width | 54 mm |
| Media Roll Diameter | Up to 130 mm |
| Emulation | SLCS, BPL-Z™, BPL-E™ |
| Print Speed | 6 ips (152 mm/sec) |
| Media Type | Gap, Black Mark, Continuous, Fan-Fold |
| Interface Options | USB, Serial, Ethernet |
| Memory | 64 MB SDRAM |
| Media Thickness | 0.06 mm |
| Barcodes | 1D: Code 39, Code 93, Code 128, EAN-8, EAN-13, UPC-A, UPC-E, Codabar, ITF; 2D: PDF417, QR Code, Data Matrix |
| Media Width | 20 mm ~ 60 mm |
Focuses on safe power connection, cord management, and avoiding damage from objects.
Covers hazards from unusual sounds, damage, improper installation, and unauthorized modifications.
Recommends locations and environmental conditions for installing the printer.
Step-by-step instructions for safely connecting the printer's power adapter and cord.
Details recommended interface cables (Serial, USB, LAN) and connection practices.
Specific instructions for connecting Serial (RS-232C) and USB B-Type cables.
Instructions for connecting LAN (Ethernet) and USB cables for Ethernet models.
Guide for connecting USB and utilizing the printer's internal WLAN module.
Explains how to perform a self-test and the diagnostic information it provides.
Describes how to configure various printer settings using the Unified Label Utility-II.
Details modes accessible via buttons/LEDs, including configuration and function lists.
Guidelines for periodic cleaning to maintain print quality and printer longevity.
Step-by-step instructions for cleaning the print head using isopropyl alcohol.
Instructions for cleaning internal sensors, rollers, and the paper path.
To Next Page
