Need help?Do you have a question about the BIXOLON SLP-TX400E and is the answer not in the manual?
Critical warnings to prevent severe injury or death.
Precautions to avoid minor injury or appliance damage.
Step-by-step guide to connect the printer's power supply.
Connecting serial, parallel, or USB cables to the printer.
Procedure for loading paper rolls into the printer.
Guide for installing thermal transfer ribbons correctly.
Configuring printer settings using the Unified Label Utility software.
Automatic calibration for the gap sensor.
Detailed sensor calibration using utility software.
Method for cleaning the printer's print head for quality.
Critical warnings to prevent severe injury or death.
Precautions to avoid minor injury or appliance damage.
Step-by-step guide to connect the printer's power supply.
Connecting serial, parallel, or USB cables to the printer.
Procedure for loading paper rolls into the printer.
Guide for installing thermal transfer ribbons correctly.
Configuring printer settings using the Unified Label Utility software.
Automatic calibration for the gap sensor.
Detailed sensor calibration using utility software.
Method for cleaning the printer's print head for quality.
General| Print Resolution | 203 dpi |
|---|---|
| Max Print Width | 104 mm |
| Max Print Length | 1, 000 mm |
| Power Supply | AC 100-240V, 50/60Hz |
| Print Method | Thermal Transfer |
| Media Thickness | 0.06 ~ 0.20 mm |
| Media Type | Continuous |
| Connectivity | USB, Serial, Ethernet |
| Memory | 8 MB Flash |
| Operating Temperature | 5°C - 40°C |
| Storage Temperature | -20 ~ 60°C |
| Operating Humidity | 10 ~ 80% RH |
| Storage Humidity | 10 ~ 90% RH |
To Next Page
