5-11 Factory Reset
This function is used to reset the printer settings to factory default settings.
5-11-1 How to reset the printer
1) Depress the Pause button for two seconds during Print Standby Mode.
2) Both LEDs will change to orange color and the printer will be set to Stand-along
Configuration Mode.
3) Depress the Feed button at the second LED sequence in 5-2-2 (LED 1 Green / LED
2 Orange – 4 times Blink) to reset the printer to factory settings, and Smart Media
Detection function will be executed.
5-12 Firmware Download
Refer to the “Firmware download manual” in the CD for the installation procedure.
※ CAUTION
Make sure if the dip cover is closed prior to operating.
To Next Page
Loading...
