BIXOLON SPP-L310 - Factory Reset; Factory Reset Method and Default Values

Rev. 1.00
- 10 -
Wi-Fi Connection Manual
4. Factory Reset
This function changes the WLAN settings of the printer to the initial factory settings.
Method
Open the paper cover, press the FEED button, press the printer power button to turn on
the printer, and close the cover when a beep sounds.
“Hexadecimal Dump”
“To terminate Hexadecimal dump”
“press FEED button three times!!”
“To change WLAN setting values”
“factory default”
“press POWER button three times!!”
When the above message is printed, press the power button 3 times.
Factory Reset Values
System
Printer Name
*Printer model
Printer Port Num
9100
User ID
admin
User Password
password
Enc / Auth
Encryption
None/Open
Network
Network Mode
Soft AP mode
SSID
PRINTER_{MAC address}
Inactivity time
10
IP Assignment Method Manual (DHCP server)
IP, Subnet, Gateway
IP : 192.168.1.1
Subnet : 255.255.255.0
Gateway : 192.168.1.2
Specification
Feature
Implementation
Operation Mode
Infrastructure, Soft AP, Ad-hoc, Wi-Fi Direct
Wireless Standard
IEEE 802.11b/g/n, IEEE 802.11a/b/g/n
Range
Up to 100m free space (Outdoor)
Security
WEP64/128
WPA1/2 – PSK
WPA 1/2 – Enterprise
(EAP-TLS, EAP-TTLS, PEAP, LEAP, EAP-FAST)
Management
WLAN Configuration tool, HTTP, Smart connection APP