BIXOLON SPP-R200II Command Manual

SPP-R200II Command Manual
Rev. 1.00 BIXOLON
- 34 -
■ The manual reading of a magnetic card is activated with MSR setting value of 41H that is set by SPP-R200II Unified
Utility. In this case, ESC M should be sent to the printer to receive the magnetic card read output prior to swiping the
card. In other cases, the printer receives automatically the output whenever the card is read.
Remarks:
■ The printer model has it own configuration of Font A and B.
■ The setting of this command remains effective until ESC !, ESC @, printer reset or power cycling is executed.
Differences:
■ Configuration of Font A and B, C: Font A(12 × 24), Font B(9 x 17), Font C(9x24)
■ MSR read mode selection for SPP-R200II is specified using SPP-R200II Unified Utility.

BIXOLON SPP-R200II Specifications

General

Type	Mobile printer
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Compatible operating systems	Windows XP/Vista/Server 2003/2008/7/8\\r OPOS\\r Linux CUPS
Flash memory	32 MB
Internal memory	64 MB
Built-in barcodes	1D, 2D, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, EAN13, EAN8, ITF, MaxiCode, PDF417, QR Code, UPC-A, UPC-E
Maximum printing width	50 mm
USB port	Yes
Serial ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Dimensions (WxDxH)	79.5 x 43.6 x 126.7 mm
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 80 %
Ethernet LAN	No
Battery voltage	7.4 V
Power source type	Battery
Battery life (max)	6.2 h