BIXOLON SRP-500 - Installation Guide Manual

www. samsungminiprinters.com
BIXOLON Samsung Serial printer
installation guide
1. Printer setting
1.1 Cable specifications (SRP-270, SRP-350, SRP-370/372)
- Use the serial cable that satisfies following specifications.
- If you don’t use incompatible cable, the printer may not work properly.
* Epson compatible cable mode
- IFA-S type and IFB-S type have Dip switch on the bracket
- Set the Dip switch on the interface card as following;
Bixolon Samsung compatible mode Epson compatible mode
1.2
Cable specification (SRP-275, SRP-500)
- Use the serial cable that satisfies following specifications.
- If you don’t use incompatible cable, the printer may not work properly
* Epson compatible cable mode
- IFC-S Type is compatible with both Bixolon Samsung and Epson cable specifications.