BIXOLON SRP-E302 - Page 34

SRP-E300/302
Ver. 1.01 BIXOLON
- 34 -
ESC M
Function:
Select character font
Code:
ASCII
ESC
M
n
Hex
1B
4D
n
Decimal
27
77
n
Range:
n = 0, 1, 48, 49
Default:
n = 0
Description:
This command selects only-byte character fonts using n as following.
n
Function
0, 48
Character font A selected
1, 49
Character font B selected
Remarks:
■ The printer model has it own configuration of Font A and B.
■ The setting of this command remains effective until ESC !, ESC @, printer reset or power cycling is executed.
Differences:
None