BIXOLON SRP-E302 - Page 44

SRP-E300/302
Ver. 1.01 BIXOLON
- 44 -
ESC i
Function:
Partial cut
Code:
ASCII
ESC
i
Hex
1B
69
Decimal
27
105
Range:
None
Default:
None
Description:
This command executes a partial cut of the paper with one point left uncut.
Remarks:
■ The same partial cut as this command is executed using ESC m and GS V.
Differences:
■ This command is effective for the printer equipped with an autocutter.
■ Autocutter operation should be enabled by setting the autocutter control nemory switch.
■ If the autocutter control memory switch of the printer not equipped with autocutter is set, the printer does not operate,
displaying the error signal by LED.