BIXOLON SRP-E302 - Page 58

SRP-E300/302
Ver. 1.01 BIXOLON
- 58 -
GS ( A
Function:
Execute test print
Code:
ASCII
GS
(
A
pL
pH
n
m
Hex
1D
28
41
pL
pH
n
m
Decimal
29
40
65
pL
pH
n
m
Range:
(pL + pH x 256) = 2 (pL=2, pH=0)
0 ≤ n ≤ 2, 48 ≤ n ≤ 50
1 ≤ m ≤ 2, 49 ≤ m ≤ 50
Default:
None
Description:
■ This command prints a specified pattern for testing on a roll paper.
• Roll paper is selected with n specified as follows:
n
Paper type
0, 48
1, 49
2, 50
Roll paper
• Different kinds of test patterns are selected according to m as follows:
m
Test pattern
1, 49
Hexadecimal dump mode
2, 50
Self-test printing(configuration+default codepage)
3, 51
Not operated
Remarks:
■ The printer cancels a macro definition in progress If this command is processed. The macro becomes invalid.
■ After completion of this command, a software reset is executed automatically to restore the printer status set during
power cycling.
■ All of the data transmitted from the host to the printer is printed and identified in hexadecimal dump mode.
■ The real time command and LSB operations are not executed during the printing of printer configuration (m=2, 50).
Differences:
None