■ This command stores the raster graphics data in the print buffer, enlarged by bx and by in the horizontal and vertical
directions.
• xL, xH specifies the raster graphics data in the horizontal directionas (xL + xH x 256) dots.
• yL, yH specifies the raster graphics data in the vertical direction to (yL + yH x 256) dots.
• d denotes the stored data(raster format).
• k denotes the number of the graphics data.
■ The graphics data is stored in the printer buffer directly.
■ NV graphics data beyond the print area for one line is not printed.
■ Real time command is not effective during processing of this command.
To Next Page
Loading...
