Labeling
Operating instructions GLP
2 -- 5
6.562.98.5.01.18
2.1.7
Call up article data via PLU number and pre--defined customer number
If in mode level 5 “Customer number preset” is activated as PLU change type
and if in the attribute editor KNVORB the attribute “Customer number” is set to
local or global, you can store the combination PLU number / customer number
into the database. To call up the article data only the PLU number must then be
entered. The assigned customer number is called up automatically!
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
P L U
or
Cust.
number
-- Call up article data
Datensatz laden
P L U
1230
P L U
Save in
OK
2020
database
Cust. number
Cust.
number
x x x
[ENTER]
--
Enter the P L U number and acknowledge, e.g. 123.
x x x
[ENTER]
--
Enter the customer number and acknowledge, e.g. 2020.
Save in
database
-- Call function store combination into database
xxx [ENTER] -- Enter password and acknowledge.
[ENTER] -- Store combination PLU-- and customer number into database
and call up article data.
2.1.8 Calling up article data in accordance with its connection type
If the relevant articles are linked to a PLU or a customer number in the attribute
editor of the PLU database, both the PLU number and the article number or either
the PLU or the customer number are to be entered to call up the article data.
First article call
Call up the article via the relevant PLU number and the customer number.
Calling up an article for a different customer
Call up customer--specific data via the relevant customer number.
Calling up another article for the current customer
Call up article--specific data via the relevant PLU number. The customer--specific
data is retained, e. g. the customer name.
2
To Next Page
Loading...
