Labeling
Operating instructions GLP
2 -- 11
6.562.98.5.01.18
2.3.1.1 Description of weight and price totals
Tare total
The grand total of all single tares is formed in the total memory ”Tare total”. It may
be displayed (see page 2 -- 31) or printed out at any time (see page 3 -- 53).
Tare totals *1, *2, *3
The tare totals *1, *2 and *3 formed in the total memories *1, *2 and *3 are compo-
sed of the totalized single tare values and a tare value for *1, *2 and *3 which might
be preset (e. g. dead weight of carton, pallet etc.). A description of the tare total
determination (*1 -- *3) is to be found in section 3.6.7 from page 3 -- 125 onwards.
Tare totals *1 -- *3 are indicated simultaneously with the display of totals *1 -- *3.
They are also printed out on total labels if preset at mode level 6 and in conjunc-
tion with 68 mm labels on printout of totals *1 -- *3.
Total of price--relevant weights (for all totals)
From program version 5.2 onwards, the drained weight may be used to calcu-
late prices in addition to the weighed weight and the fixed weight. The presetting
as described on page 3 -- 23 permits to select either the net weight or the fixed
weight, or the drained weight for the calculation of prices.
Total of drained weights for totals 1 -- 3
The drained weight for single packages is determined as follows:
Drained weight = net weight -- preset ingredient weight or ....
Drained weight = fixed weight -- preset ingredient weight
Depending on the presettings made, the ingredient weight may be entered as an
absolute value or a percentage rate related to the net weight (see page 3 -- 22).
In the totalization, the drained weight total is formed on the basis of the price--rele-
vant weight total.
Drained weight total = total of price--relevant weights
In the case of ”Mixed labeling” (change from net weights to drained weights and
vice versa) there is no possibility of calculating a drained weight total.
Total of net weights for totals 1 -- 3
The total of the net or fixed weights and the price--relevant weights is separately
totalized in order to permit the total of the net weights to be printed out in addition
to the price--relevant weight (see page 3 -- 23).
Total of gross weights for totals 1 -- 3
The total of the gross weights is calculated prior to the output of the label or the
list printer.
Gross total = net total + tare total
The rules as described in section 3.6.7, page 3 -- 125 apply to the tare totals.
2
To Next Page
Loading...
