Labeling
Operating instructions GLP
2 -- 36
6.562.98.5.01.18
Secondary totals may become
wrong
Secondary price totals may become wrong.
exit via <ENTER>
The appearance of this status message indicates that the printout of the 2nd sel-
ling price (secondary price) was switched on or off.
[ENTER] -- Acknowledge the status display and clear it.
When labeling, the first output of a single label causes the secondary price total
in the total display to be cleared (see display of total 1) and further secondary
price totals no longer be formed. The weight total and the primary price total are,
as before, totalized. When printing a total label, only the primary price total will be
printed and no secondary price total.
Total 1
Pcs # xxx Piece total
Wgt. kg xx,xxx Weight total
Prim. $ xxx,xx Primary price total
Sec. € xxx,xx Secondary price total
Tare kg x,xxx Tare total
Labeling disabled
Close
Accept.
Process blocked:
Price type change: price total deleted
window
The appearance of this status message indicates that a country combination was
selected in ’Dual currency printing’ or called up together with PLU data which
is not created in the conversion table. The conversion rate to calculate a secon-
dary unit price on the basis of the primary unit price is not provided.
Then:
Accept.
-- Acknowledge the status message
--
Labeling with this PLU or setting can only be restarted when the re-
levant country combination together with the relevant conversion
rate has been entered in the conversion table.
2
To Next Page
