Labeling
Operating instructions GLP
2 -- 35
6.562.98.5.01.18
2.12.2.4Label examples showing the new terms
Secondary unit price (2nd unit price)
Conversion rate
Primary unit price (unit price)
Secondary price (2nd selling price)
Primary price (selling price)
Secondary price total (2nd selling price total)
Primary price total (selling price total)
Total label
Single label
Conversion rate
2.12.3 Status messages
Price type change: price total cleared
Close
Accept.
Process blocked:
Price type change: price total deleted
window
If ’Price type change: price total deleted’ appears in a status message (see ex-
ample), a different primary or secondary country has been called up due to a PLU
change. A subsequent labeling would lead to an incorrect price total. Then:
Accept.
-- Acknowledge the status message
The start of a subsequent labeling procedure will cause the price total in the total
display to be deleted (’0’) and no further price totals to be formed. Piece totals
and weight totals are further totalized. When printing a total label, only the weight
and piece totals will be printed out and no price total. If printing a total label, e. g.
total 1, the daily total etc., the price total will again be formed.
If changing only the secondary country and retaining the primary country during
a PLU call, e. g. EU, (EU / Germany --> EU / France), a primary price total is, as
before, formed in Euro. The secondary price total is cleared in the total display and
the total label printed with the primary price total only.
2
To Next Page
