Bizerba GLP 80 - ARTICLE DATA

Presettings for labeling
Operating instructions GLP
3 -- 2
6.562.98.5.01.18
3.1 Article data
The data of articles to be labeled may be stored in the unit under a PLU number
or a customer number. There is also the possibility of presetting article data ma-
nually, or modifying articles called up via the PLU data.
3.1.1 Call up article data via PLU number
If the article data are only stored under PLU numbers, you may call them up via
the relevant PLU number.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Article
data
P L U
-- Calling up article data
Load record
P L U
1
P L U
Cancel
OK
xx [ENTER] -- Enter the PLU number and acknowledge.
3.1.2 Call up article data via PLU and customer number
If the article data are stored under PLU and customer numbers, you may enter
both in the input menu and call up the article.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Article
data
P L U
-- Calling up article data
Load record
P L U
1340
P L U
Cancel
OK
Cust. number
2020
Cust.
number
xx [ENTER] -- Enter the PLU number and acknowledge, e. g. 1340.
xx [ENTER] -- Enter the customer number and acknowledge, e. g. 2020.
[ENTER] -- Enter input and call up article data.
3