Presettings for labeling
Operating instructions GLP
3 -- 13
6.562.98.5.01.18
Printing the 2nd price on single labels
Dual currency price printing may be activated
here which permits the secon-
dary price to be printed in addition in the price field of the label.
If the activated secondary price is to be contained also in the bar code,
the code content ”Conv. price” must be set in the code structure rules.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
Article
data
Price Print
price
Print
sel.price
[ETC]
Print
2nd price
Call up the selection menu
DoNotPri
2nd price
Make this setting if no secondary price is to be printed in the price
field of the label (standard setting).
Pr.2nd pr
num.+cod.
Make this setting if a secondary price, e. g. the secondary price
in EURO, is also to be printed in the price field of the label.
This set-
ting activates the dual currency price printing.
2nd price in the price field
2nd price in the bar code
(calculated on the basis of the
price divided by the conv. rate)
code only
Pr.2nd pr
Make this setting if the 2nd price is to be printed on labels in the bar
code only. See above--mentioned code printing.
1st price in the price field
2nd price in the bar code
(calculated on the the basis of the
price divided by the conv.
rate)
Printing the conversion rate
on single and total labels
”With print. o. conv. rate” can only be preset if ”pr. 2nd pr. num. +
code” is activated (see description above).
On PLU change, this setting may be changed under the PLU data in rela-
tion to the presetting made.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Article
data
Price Print
price
-- Call up the selection menu.
Print
cnv.rate
Select W/o(--) or With(+) printout of conversion rate on single and
total labels.
Standard setting: without(--)
3
Conversion rate on single and total labels
To Next Page
Loading...
