Presettings for labeling
Operating instructions GLP
3 -- 24
6.562.98.5.01.18
3.1.4.8 Presetting the minimum weight
If the attribute for the minimum weight is activated in the database table GGDAT,
a minimum weight may be preset here or the minimum weight called up together
with the PLU data changed if required.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Article
data
Weight
[ETC]
Minimum
weight
-- Call up the input menu.
xx [ENTER] or [ETC] -- Enter the new value and acknowledge or save in the da-
tabase (see page 1 -- 32).
3.1.4.9 Presetting the maximum weight
If the attribute for the maximum weight is activated in the database table GGDAT,
a maximum weight may be preset here or the maximum weight called up together
with the PLU data changed if required.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Article
data
Weight
[ETC]
Maximum
weight
-- Call up the input menu.
xx [ENTER] or [ETC] -- Enter the new value and acknowledge or save in the da-
tabase (see page 1 -- 32).
Description of minimum or maximum weight
If the attribute for the minimum weight and the maximum weight is activated in the
database table GGDAT, the weight of the weighed packages may be compared
with a minimum or a maximum weight. Depending on the operating mode ’W/o’
or ’With’ weight classes, the following functions are offered:
Operation without weight class
-- Packages lying outside the preset minimum weight and maximum weight are
considered as incorrect and are not labeled and, if required, separated via a
divider or a package ejector.
Operation in combination with a weight class
-- Packages which are lighter than the preset minimum weight are handled ac-
cording to the presettings of the first column of the weight class table.
-- Packages which are heavier than the preset maximum weight are handled ac-
cording to the presettings of the last column of the weight class table.
-- Packages lying between the minimum weight and the maximum weight are
subjected to the normal check of the weight class.
This permits to implement the classical Min/Max functionality with only one fixed
weight class table and to maintain the weight limits per PLU. It is advisable to use
the 3 weight class columns I to 1g I to 6 kg I greater than 6 kg I of the weight class
table for this purpose.
3
To Next Page
Loading...
