Presettings for labeling
Operating instructions GLP
3 -- 42
6.562.98.5.01.18
3.2.6 Static texts
Static texts for customer--specific labels may be entered in text tables at mode
level 3 or 4 and stored under text parameter numbers. These text tables may then
be allocated to the relevant articles under the PLU data via their parameter num-
ber or called up manually at mode level 1 or 2. The static texts are printed out
on the labels up to the moment at which another text table is called up manually
or via the PLU data. If required, static texts may be modified at mode level 1 or
2. The assignment of the static texts of a table to customer--specific labels is car-
ried out by means of the BIZERBA BLD layout program.
Calling up a text table with static texts
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Texts Static
texts
-- or call up static texts at mode level 2.
Static
text no.
xx [ENTER] --
Enter the relevant parameter number and acknowledge.
The allocated text table is called up and the texts of the text table are printed out
in the relevant text fields of the customer--specific label in accordance with the lay-
out specification.
Modifying static texts
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Texts Static
texts
-- Call up static texts at mode level 2.
Static
text no.
xx [ENTER] --Enter the parameter No. of the text table and acknowledge.
Static
texts 1--10
-- Select the table text range, e. g. “Static texts 1--10”.
Static
text 3
-- Call up the text to be edited, e. g. “Static text 3”.
-- Enter or modify texts as described in section 2.2 of the pro-
gramming instructions. Text length: max. 60 characters.
Storing static texts
Terminate
-- Store the text using the function ”Terminate”.
The text editor is exited and the entered text is then printed in
the relevant text field from the next label onward.
-- The entered text is displayed above the relevant softkey, e. g.
Special offer.
3
Static
text 3
Special offer
To Next Page
Loading...
