Presettings for labeling
Operating instructions GLP
3 -- 43
6.562.98.5.01.18
3.3 Date
3.3.1 Date 1 options (packing date)
Set how date 1 (packing date) is to be printed on the labels.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Date Date 1
options
-- Call up the selection menu.
W/o pr.
of date 1
Make this setting if no date 1 is to be printed on the labels.
With
date1
Make this setting if date 1 is to be printed on the labels (standard).
Standard date 1: daily date of the clock module.
Date 1
coded
Make this setting if date 1 is to be printed on the labels in an enco-
ded form. Example: indication of week CW 35 (see notes below).
D.o.Y. (x)
date 1
Make this setting if date 1 is to be printed on the label as the day
of the year without leading zeros. Example: 20.02 = 51
D.o.Y. (00x)
date 1
Make this setting if date 1 is to be printed on the label as the day
of the year with leading zeros. Example: 20.02 = 051
As a Con
date fld1
[ETC]
If set to “Day of the year“ an offset may be entered here
which is then added to the relevant day of the year. Example
:
date 15.01=day of the year 15. Offset = 10. Print = 25.
3.3.2 Date 2 options (best before/sell--by date)
Operating sequence: Description
Date Date 2
options
Call up the selection menu for date 2. The possible pre-
settings are already described under date 1 (see above).
3.3.3 Date 3 options (use--by date)
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Date Date 3
options
-- Call up the selection menu.
W/o pr.
of date 3
Make this setting if no date 3 is to be printed on the labels
(standard).
With
date 3
Make this setting if date 3 is to be printed on the labels.
Date 3
coded
Make this setting if date 1 is to be printed on the labels in an enco-
ded form. Example: indication of week CW 35.
D.o.Y. (x)
date 3
Make this setting if date 3 is to be printed on the labels as the day
of the year without leading zeros. Example: 20.02 = 51
With
+ days
Set whether or not the preset +-days are to be printed on the labels
instead of date 3.
3
To Next Page
Loading...
