Presettings for labeling
Operating instructions GLP
3 -- 44
6.562.98.5.01.18
D.o.Y. (00x)
date 3
Make this setting if date 3 is to be printed on the labels as the day
of the year with leading zeros. Example: 20.02 = 051
As a Con
date fld2
[ETC]
If set to “Day of the year“ an offset may be entered here
which is then added to the relevant day of the year.
Selecting the day of the year for date field 3
D.o.Y.
date fld3
With “DayOfY(x) date 3” preset, the selection menu for the selec-
tion of the relevant day of the year may be called up.
Of
date 3
-- Make this setting if the day of the year of date 3 is to be printed
on labels in “Date field 3” (standard).
Of
date 1
-- Make this setting if the day of the year of date 1 is to be printed
on labels in “Date field 3”.
Of
date 2
-- Make this setting if the day of the year of date 2 is to be printed
on labels in “Date field 3”.
3.3.4 Setting the date/time
Dates 1--3 and time of dates 1/2 are determined by the device in relation to the
setting, or if required, directly entered. This will be indicated accordingly:
Date or time calculated: -- display of value in brackets
Date or time entered: -- display of value without brackets
Date 2
(25.09.05)
Date 2
26.09.06
Date 2 = calculated
(value in brackets)
Date 2 = preset
(value without brackets)
If the printout of the 4-digit year is preset (see page 3 -- 50), only the last 2 digits
of the year must be entered. The first 2 digits are automatically entered.
Example: year to be entered = 2005. Input: 05
After the input of 05, 20 is automatically prefixed.
3.3.4.1 Date 1
Date 1 (packing date) is automatically set to the system date of the internal clock
as standard. If required, date 1 may also be manually entered.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Date Set date
time
Date 1
-- Call up the input menu.
xx xx
--
Enter date 1 in conjunction with a 4--digit year, e. g. 25.07.05.
After the input of 05, ”20” is automatically prefixed.
Date 1
25.07.2005
[ENTER]
--
Acknowledge the input.
3
To Next Page
Loading...
