Presettings
Operating instructions GLP
3 -- 65
6.562.98.5.01.18
3.5 Labeling
3.5.1 Release mode
3.5.1.1 Process
Depending on the type of labeler and the labeling mode, the release mode for la-
bel printing may be set in different ways.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Labe-
ling
Release
mode
Process
-- Call up the selection menu.
Autom.
-- Make this setting if labels are to be printed after the scale has
stabilized.
-- Make this setting for fixed price, fixed weight or fixed value labe-
ling if the next label is to be printed automatically after the remo-
val of label.
Manual
-- Make this setting if labels are to be printed via key [PRINT].
-- Make this setting if the tare weight is to be weighed
(see page 2 -- 14).
-- Make this setting if packages are to be reweighed (see page
2 -- 24)
Start
aut. lab.
-- Setting on GLP--PRIMA
External
-- Make this setting if label printing is to be released externally.
Function identical to ”manual external start”.
Remote
device
-- Make this setting on the slave unit if label printing is to be
released by the higher--order master unit.
Remote
inactive
[ETC]
--
Make this setting on the slave labeler if it is not to print
labels on receipt of a print command from the master unit.
If printing is to be effected on an external unit only, internal printing may be deacti-
vated as described on page 3 -- 148.
3
To Next Page
Loading...
