Presettings
Operating instructions GLP
3 -- 113
6.562.98.5.01.18
3.6.1.3 Preselecting type total 2
The type total necessary for total 2 may be entered here.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Config.
total
Preselect
total
Presel.
type tot2
-- Call up the selection menu.
Preselect
nmb.o.pcs
Make this setting if the total to be labeled is to be preset as a piece
total.
Preselect
weight
Make this setting if the the total to be labeled is to be preset as a
weight total.
Preselect
price
Make this setting if the total to be labeled is to be preset as a price
total.
Number of
totals 1
Make this setting if the total to be labeled is to be the number of the
reached totals 1 (setting used for the example).
Second.
price
Make this setting if the secondary price total is preset as the total
to be labeled.
3.6.1.4 Presetting total 2*
This menu point serves to enter the total necessary for total 2 in the previously
selected total type, e. g. number *1 in *2 (see ”Preselecting type total 2”).
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Config.
total
Preselect
total
Number
*1 in *2
-- Call up the input menu.
xx [ENTER] , [ETC] --Enter total 2 according to the preset total type, e. g. ”Number
*1 in *2” and acknowledge or save in database
(see page
1 -- 32)
.
3
To Next Page
Loading...
