EasyManua.ls Logo

Bizerba GLP 80 - Page 263

Bizerba GLP 80
394 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Presettings
Operating instructions GLP
3 -- 125
6.562.98.5.01.18
3.6.7 Total tare
In addition to the determined tare totals of single packages, it might become ne-
cessary in order labeling procedures to add the dead weight of cartons, packs or
pallets to the relevant tare total in the tare total memories 1 -- 3. Here, the relevant
tare weight may be preset for totals 1 to 3.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Config.
total
[ETC]
Total
tare
-- Call up the input menu.
Total 1
tare
x x [ENTER] -- Enter the tare for total 1 and acknowledge.
Total 2
tare
x x [ENTER] -- Enter the tare for total 2 and acknowledge.
Total 3
tare
x x [ENTER] -- Enter the tare for total 3 and acknowledge.
Depending on the configuration, the tare totals in the total memories of totals 1
--3 are formed in different ways, i. e.
Tare total *1
> With each package the tare total of total *1 is increased by the tare weight of
the relevant package.
> When printing total *1 or reaching the preselected value of total 1, a preset total
1 tare is added to the tare total of total 1.
Tare total *1 = (total single tare) + total 1 tare)
Tare total *2:
Total*2 counts the single packages
> With each package, the tare total of total *2 is increased by the tare weight of
the relevant.
> When printing total *2 or reaching the preselected value of total 2, the total 2
tare is added to the tare total of total 2.
Tare total *2 = (total single tare) + total 2 tare)
Total *2 counts the number of totals 1
> With each package, the tare total of total *2 is increased by the tare weight of
the relevant package.
> When printing total *2 or reaching the preset value of total 2, a preset total 2
tare is added to the tare total of total 2.
> When printing total *1 or reaching the preselected value of total 1, the total 1
tare is added to the tare total of total 2.
Tare total *2 = (total single tare) + (total tare 1) + total 2 tare)
3

Related product manuals