Bizerba GLP 80 - Page 262

Presettings
Operating instructions GLP
3 -- 124
6.562.98.5.01.18
3.6.4 Customer labels with totals*
If the totals are to be printed on customer--specific labels, different totals may be
printed on different customer labels.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Config.
total
Cust. lab.
totals
-- Call up the input menu.
Cust. lab.
No. tot. 1
xx [ENTER] -- Enter the label number for total 1 and acknowledge.
Cust. lab.
No. tot. 2
xx [ENTER] -- Enter the label number for total 2 and acknowledge.
Cust. lab.
No. tot. 3
xx [ENTER] -- Enter the label number for total 3 and acknowledge.
Cust. lab.
No.r.tot.
xx [ENTER] -- Enter the label number for other totals and acknowledge.
3.6.5 Total code
Presetting a different total code for total labels is described on page 3 -- 33.
3.6.6 Unit of weight for totals
Presetting the printout of the unit of weight is described on page 3 -- 17.
3