Presettings
Operating instructions GLP
3 -- 123
6.562.98.5.01.18
3.6.3.4 Enter extra unit price for price total determination
If the price totals are not calculated from the added individual prices but from total
weight times special unit price, the relevant special unit price can be entered here.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Config.
total
Equalize
total
Extra *
UP
-- Call input.
xxxx [ENTER] --Enter other unit price for price total determination.
Depending on the presetting and the input, the weight total is determined
as follows:
Total 1 is printed out:
-- total 1 is reached
+ equalized weight *1 >0: --> weight = equalized weight *1
-- otherwise: -->
weight = real weight from the total
Total 2 is printed out:
-- total 2 is reached
+ equalized weight *2 >0 --> weight = equalized weight *2
-- equalized weight *1 >0
+ preselection mode of total 2 = number of totals 1
+ total 1 is reached -->
weight = piece total 2 x
equalized
weight *1
-- otherwise -->
weight = real weight from the total
Total 3 is printed out:
-- total 3 is reached
+ equalized weight *3 >0 --> weight = equalized weight *3
-- equalized weight *1 >0
+ preselection mode of total 3 = number of totals 1
+ total 1 is reached -->
weight = piece total 3 x mal
equalized
weight *1
-- equalized weight *2 >0
+ preselection mode of total 3 = number of totals 2
+ total 2 is reached -->
weight = piece total 3 x
equalized
weight *2
-- equalized weight *1 >0
+ preselection mode of total 3 = number of totals 2
+ preselection mode of total 2 = number of totals 1
+ total 1 is reached
+ total 2 is reached
+ preselection of total 2 >0 --> weight = piece total 3 x preselection
of total 2 x equalized weight *1
-- otherwise -->
weight = real weight from total
3
To Next Page
Loading...
