Presettings
Operating instructions GLP
3 -- 122
6.562.98.5.01.18
3.6.2 Batch number
The input of the batch number is described on page 3 -- 25.
3.6.3 Total equalization
If batch and grand totals are preset for labeling, the total at which the grand total
is reached may be preset here (see also section 2.7).
Example:
Carton or pack total (total 1) = 40 kg
Pallet total (total 2) = 500 kg
After labeling of 12 carton totals with 40 kg, the pallet total of 480 kg is reached.
After labeling of 13 carton totals, a pallet total of 520 kg would already be reached.
3.6.3.1 Fill up carton total 1
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Config.
total
Equalize
total
-- Call up the selection menu.
Fill *1
carton
+
--
Preset ”+” if the cartons/packs are to have their nominal weight.
Preset ”--” if the grand total is set to yes and is to have priority over
the carton total.
3.6.3.2 Fill up pallet total 2
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Config.
total
Equalize
total
-- Call up the selection menu.
Fill *2
pallet
+
--
Preset ”+” if the cartons/packs are to have their nominal weight.
Preset ”--” if the grand total is to have priority over the carton total
reached.
3.6.3.3 Preset equalized weight for totals 1--3
If, e.g., the same carton weight is always to be printed for a carton irrespective of
the added weight of the individual packages, then this can be preset as an equali-
zed weight. The summation per total is described on the next page!
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Config.
total
Equalize
total
-- Call up the input menu.
x x [ENTER] -- Enter the equalized weight for total 1 and
acknowledge. Calculation see next page!
x x [ENTER] -- Enter the equalized weight for total 2 and
acknowledge. Calculation see next page!
x x [ENTER] -- Enter the equalized weight for total 3 and
acknowledge. Calculation see next page!
3
Equal.
wgt*1
Equal.
wgt*2
Equal.
wgt *3
To Next Page
Loading...
