Bizerba GLP 80 - Page 276

Presettings
Operating instructions GLP
3 -- 138
6.562.98.5.01.18
3.7.3.6 Character height*
If the printing area no longer suffices upon selecting a smaller label size, respec-
tive texts can be adjusted to fit the smaller label area by deselecting ”overlength”
or ”underlength” (see explanation).
Definition:
Apfel
Character height
Overlength
Underlength
Explanation:
Deselecting overlength: should only be done for upper case letters having no
accent.
Deselecting underlength: should only be done for lower case letters having no
underlength.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2 [ETC]
Labels Layout
options
Char.
height
-- Call up the selection menu.
lenght
W/o over--
Make this setting if upper case letters are to be printed without
overlength.
lenght
W/o under
Make this setting if lower case letters are to be printed without un-
derlength.
lenght
With O/U
Make this setting if all letters are to be printed with underlength
and overlength (standard).
Layout
S.a. in
Make this setting if this is preset in the layout rules for customer--
specific labels.
3.7.3.7 Frame printing*
On blank labels, the selling price may be printed with a frame. A relevant preset-
ting can be made here.
Printing of the frame is not possible on 68 mm BIZERBA labels and
68 mm ISB labels.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2 [ETC]
Labels Layout
options
[ETC] -- Call up the selection menu.
--
+
Frame
Preselect printing of selling price ”without”(--) or ”with(+)” frame.
Standard: without(--)
Label example:
Frame
3