Bizerba GLP 80 - Page 32

Overview of equipment
Operating instructions GLP
1 -- 12
6.562.98.5.01.18
1.2.5 Equipment supplied
1.2.5.1 GLP 80 / GLP 160
-- Label printer GLP 80 or GLP 160 without label roll
-- Power cable with European standard size plug
-- Brief instructions 6.562.98.8.99.00
-- Operating and programming instructions on CD 6.562.98.1.00.02
1.2.5.2 GLP--W 80 / GLP--W 160
-- Labeler GLP--W 80 or GLP--W 160 without label roll
-- Power cable with European standard size plug
-- Operating terminal GT 240
-- Connecting cable for operating terminal
-- Load receptor with connecting cable
-- Brief instructions GLP 80/160 6.562.98.8.99.00
-- Brief instructions GT 240 6.562.98.4.99.00
-- Operating instructions 6.562.98.5.01.18
-- Programming instructions 6.562.98.2.01.18
-- CD with Windows printer driver for GLP and thedocumentation on
CD562.98.0.00.xx
1.2.6 Options
-- EDP 2/3 interface
-- Ethernet interface
-- Print width: 104 mm (GLP 160)
-- Thermal transfer tape TTF incl. tape monitoring
-- Label cutting device for ticket stripes or labels on backing paper
-- Bizerba cutting device for Linerless labels
-- Stand
-- Label application plate
1.2