Maintenance
Operating instructions GLP
4 -- 14
6.562.98.5.01.18
4.2.6 Advice on verification
Labelers connected to a verified scale are permitted to be used in operations
requiring measuring instruments which are subject to verification.
Initial EC verification
The year of initial EC verification is shown on the identification plate of the labeler
(see illustration) or the scale (in case of the GD).
05
Year of initial verification
e. g. 2005
If the identification plate bears the symbol for initial EC verifica-
tion (green M), the unit has been verified by the manufacturer
permitting it to be put into service in all EC Member States and
to be used in operations requiring measuring instruments
which are subject to verification.
If the identification plate bears the H 05 mark for national manu-
facturer verification, the unit has been verified by the manufac-
turer permitting it to be put into service at the place of use and
to be used in operations requiring measuring instruments
which are subject to verification within the Federal Republic of
Germany.
Equipment carrying no identification plate is subject to the statutory provisions of
the relevant countries.
Reverification
In compliance with the requirements of the Weights and Measures Regulations,
users of measuring instruments must ensure that these are reverified according
to the legal requirements applicable in individual Member States. Reverifications
are to be applied for by the user at the competent Weights and Measures
Authority. In the Federal Republic of Germany, the verification validity period for
labelers is currently 1 year. Otherwise, the statutory provisions of the relevant
country apply.
General notes
Scales calibrated to a certain gravity zone (gravitational acceleration) are not per-
mitted for use in other gravitational zones without being reverified.
In compliance with statutory provisions currently in force, users of price labelers
must ensure that these are used for the puposes for which they are intended. This
includes metrological requirements, especially in those cases where modifica-
tions or extensions have been made.
Scales having undergone initial EC verification bear a yellow
verification mark with the inscription ”Verified by Bizerba” (initial
verification by Bizerba).
Advice on verification for non--EC Member States
The statutory provisions of the relevant countries have to be adhered to.
4.2
05
Geeicht von
Verified by
Vérifié par
Verificado por
To Next Page
Loading...
