Maintenance
Operating instructions GLP
4 -- 15
6.562.98.5.01.18
4.2.7 Thermal labels
4.2.7.1 Advice on label supply
To avoid disturbances, unsatisfactory print quality and contamination of the equip-
ment, use only thermal label rolls tested and approved by Physikalisch--Techni-
sche Bundesanstalt (PTB). Approved thermal label rolls are marked on the roll,
the packing or on the label with a PTB number.
Tested and approved thermal papers are as follows:
-- BBL 92
-- BRL 90
Use only thermal adhesive labels for low temperature application.
Bizerba cannot accept liability for damage or malfunction resulting from the
use of thermal label rolls other than tested and approved by PTB.
Users are, therefore, requested to buy their label rolls exclusively from our sales
office in Bochum. The address is as follows:
Bizerba GmbH & Co. KG
Papier und Etiketten
Harpener Feld 14
D--44805 Bochum
Telefon: 0234 / 9557141
Telefax: 0234 / 9557199
4.2.7.2 Advice on storage of thermal labels
Store unprinted thermal labels (in the original packing) in a closed carton in a
dust--free place which is
not
exposed to direct light.
The labels will retain their printing quality for up to 5 years when stored at a tempe-
rature of max. 60
°
Celsius and a max. relative air humidity of 65%.
4.2
To Next Page
Loading...
