Maintenance
Operating instructions GLP
4 -- 20
6.562.98.5.01.18
4.2.8.4
”Operator language” service function
After selecting the ”Operator language” service function (see page 2 -- 9), the
selection menu for the operator language is called up from mode level 5. Here
e.g. the service technician may set the operator language he/she requires for
operation and maintenance by the pressing the service key-- no matter which lan-
guage was set before. After selecting the operator language the basic display
of mode level 1 is automatically indicated in the selected operator language. If
the operator language is changed in case of a service call, please set again the
operator language!
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
deutsch
Activate German as the operator language.
english
Activate English as the operator language.
français
Activate French as the operator language.
italiano
Activate Italiano as the operator language.
portugues
Activate Portugues as the operator language.
español
Activate Español as the operator language.
4.2
To Next Page
Loading...
