Overview of equipment
Operating instructions GLP
1 -- 17
6.562.98.5.01.18
1.2.10 Interfaces
1.2.10.1
Description of interfaces
0
1
SB
GT 240
EDP 1
EDP 2
LAN (option)
EDP 3
(option)
I/O plug
(option)
Minibus for
load receptor
+30V for WLAN module
or terminal GT--CT
Connection WLAN module or GT--CT
SB System bus, Profibus RS485, RJ45 connector
LA Scale connector, minibus, 15--pin D--SUB
LAN Ethernet, RJ45 connector, 10 base T, TCP/IP
Connection WLAN module or GT--CT display.
EDP 1: RS 232C or RS 422 or TTY
GxNet via AEDP, GxCom via HDLC
Connector: 9--pin D--Sub
Use: EDP, PC, scanner, hand--held reader, modem, etc.
Protocol: see GX-Net description No. 561.98.xxxxx
EDP 2/3: RS 232C or RS 422 or TTY (option)
Connector: 9--pin D--Sub
GT 240 Connector for operating terminal GT 240
1.2
To Next Page
Loading...
