Installation and commissioning
Operating instructions GLP
1 -- 19
6.562.98.5.01.18
1.3 INSTALLATION AND COMMISSIONING
1.3.1 General installation instructions
Installation of the equipment and instruction of operating personnel are carried
out exclusively by qualified Bizerba personnel or persons and companies authori-
zed by Bizerba.
Install the labeler in such a manner as to ensure easy access for
operation, maintenance and cleaning.
Front side: Working area of the operator. This area has to remain
completely free.
Left and right Provide enough space for relevant conveying equipment
side: to ensure proper feeding and conveying of the packages.
1.3.2
Hints and tips for the installation of labelers operating with a load
receptor
Install the components, such as the supply bin for packages labeled and and
those to be labeled, the labeler and load receptor or load receptor in such a man-
ner as to facilitate the removal of the packages to be labeled, the weighing proce-
dures, the removal of labels on the labeler, the application of the label to the pak-
kage and the depositing of the packages labeled without larger deviations in travel
and height (see illustration below).
1.3.3 Operating procedure for weighing and labeling packages
The output of the labeled packages is significantly increased when the next
package is placed on the load receptor immediately after the removal of the
package from the load receptor. During the weighing time the printed label of the
former package may be removed from the labeler, applied to the package and the
package deposited.
-- Remove the weighed package with one hand from the load receptor, place it in
frontof the labeler and using yourother hand simultaneously take the next pak-
kage to be labeled out of the supply bin and place it on the load receptor (1).
-- Remove the printed label from the labeler, stick it to the removed package (2)
and place the labeled package into supply bin (3).
-- Repeat the procedure to label the remaining packages.
1.3
Labeler
1
1
2
3
Supply bin:
packages to be
labeled
Supply bin:
packages labeled
Operator
Load receptor
To Next Page
Loading...
