Display and operation
Operating instructions GLP
1 -- 41
6.562.98.5.01.18
Key in the
display
Key in the
instructions
Key functions
Back
[Back]
Use the [Back] key to return to the basic display after having
called up the direct PLU keyboard or Quick keyboard.
Quick
keyboard
[Quick
keyboard]
Use the [Quick keyboard]-key to call up a programmed
Quick keyboard (see page 1 -- 71 onward).
The key is dis-
played after using the [LAYER] key.
SET
[SET]
With an activated Quick keyboard the key programming can
be called up with the [SET] key. If the key is not displayed
then the programming is not released in mode level 5!
[CAPS]
Use the [CAPS] key to switch back and forth between up-
per and lower case letters during text inputs. Display via
.
.
[RECORD]
Use the [RECORD] key tho restart macros or using the
shortcut [SHIFT] [RECORD] to record macros.
[ ]
[ ]
[ ]
[ ]
Move cursor upward
Move cursor downward
Move cursor left
Move cursor right
SELECT
[SELECT]
Use the [SELECT] key to open a selection or an input menu
in a table editor.
HOME
[HOME]
Use the [HOME] key to exit any menu and to return to the
basic display.
C
[CLEAR]
Use the [CLEAR] key to clear the inputs or string content
in the code structure or scanning rules.
[ENTER]
Use the [ENTER] key to acknowledge each input or selec-
tion and to close the input or selection menu afterwards.
ESC
[ESC]
Use the [ESC] key to exit an editor or a selection or an input
menu.
[LIST]
Use the [LIST] key to call up the printer function keys in an
editor (see Chap. 1.4.6.5 on page 1 -- 42).
[TAB]
Use the [TAB] key to set a tab for customer labels in the text
editor.
+/--
[TOGGLE]
Use the [TOGGLE] key to select or deselect the plus/minus
sign or to switch on/off a function in the table editor.
1.4
To Next Page
Loading...
