Display and operation
Operating instructions GLP
1 -- 62
6.562.98.5.01.18
1.4.10.3
1st total window
The 1st total window can be activated here by selecting the total to be displayed.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[SECOND] [MODE] -- Call up the connection table
20 Operating
GT--CT
-- Call up the GT--CT operating level via softkey.
1st total
window
-- Call up the presetting for the 1st total window.
W/o 1st
tot.window
Select ’W/o 1st total window’ if the total window 1 is not to be dis-
played.
Total 1
Display the content of total 1 in total window 1.
Standard setting
Total 2
Display the content of total 2 in total window 1.
Total 3
Display the content of total 3 in total window 1.
Article
total
Display the content of article total in total window 1.
Prod.group
total
Display the content of product group total in total window 1.
Daily
total
Display the content of daily total in total window 1.
Tare
total
Display the content of tare total in total window 1.
Preset display data in the ETC part
Remote
labels
In conjunction with multiple labelers, the remainder of labels still to
be printed may be displayed by the remote device (see below).
*1 of act.
presel.col.
If *1 is preselected for the called up PLU in the total preselection
matrix, the actual total and the preselected total may be displayed
in the total window.
*2 of act.
presel.col.
If *2 is preselected for the called up PLU in the total preselection
matrix, the actual total and the preselected total may be displayed
in the total window.
Total
display tool
With the black scroll bar on ’Total display tool’, the total defined
in the total display tool is displayed (see page 1 -- 60).
Reserve
prin./scale
Display the histogram of the evaluated throughput in the 1st total
window.
1.4
To Next Page
Loading...
